Ehtma - Code Of Practice; Warranty - Altrad Belle HPP POWER PACKS 20-110D Serie Manual Del Operador

EUROPEAN HYDRAULIC TOOL MANUFACTURERS ASSOCIATION CODE OF PRACTICE – HYDRAULIC POWER SYSTEMS
Before Starting. Refer to manufacturer's operating instructions.
Compatibility. Hydraulic Power Systems are designed to operate at a speci c Flow and Pressure. Equipment produced by EHTMA
members carries a triangular colour coded range identi cation label. Check that both the tool and power unit have
the same identi cation label before operation. It is imperative that power systems and tools having
different colour codings are not interconnected as this practice is both inef cient and dangerous.
For reference the EHTMA colour code is as follows:-
Classi cation
A
B
C
D
E
F
G
Z
If in doubt consult the equipment manufacturer.
Characteristics. Operators not familiar with the use of hydraulic tools should note the following points:-
1) Hydraulic breakers are usually more powerful than the equivalent weight pneumatic tools.
2) The body of the hydraulic breaker and the supply hoses will become quite warm during normal operation.
3) As the breaker has no exhaust it is generally much quieter in operation. This should not be taken as a lack of power.
Safety Points.
1) Always wear safety footwear when operating breaking equipment.
2) Eye protection is strongly recommended, particularly on hard surfaces.
3) Ensure that the 'steel' is securely locked into the breaker.
4) Check hoses for deep cuts or exposed braiding; replace any damaged hose.
Your new Altrad Belle Group Hydraulic Power Pack is warranted to the original purchaser for a period of one-year (12 months) from the
original date of purchase.
The Altrad Belle Group warranty is against defects in design, materials an workmanship.
The following are not covered under the Altrad Belle Group warranty:
1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly,
operation or user maintenance instructions.
2. Alterations, additions or repairs carried out by persons other than Altrad Belle Group or their recognised agents.
3. Transportation or shipment costs to and from Altrad Belle Group or their recognised agents, for repair or assessment against a
warranty claim, on any machine.
4. Materials and/or labour costs to renew, repair or replace components due to fair wear and tear.
The following components are not covered by warranty.
• Engine air lter
• Engine spark plug
Altrad Belle Group and/or their recognised agents, directors, employees or insurers will not be held liable for consequential or other
damages, losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.
Warranty Claims
All warranty claims should rstly be directed to Altrad Belle Group, either by telephone, by Fax, by Email, or in writing.
For warranty claims:
Altrad Belle Group Inc
3959 Electric Rd, Suite 360, Roanoke, VA, 24018, USA.
Tel : +1.540.345.5090,

EHTMA - Code Of Practice

Colour Code.
Yellow
Blue
Green
Brown
Red
Black
Orange
Grey
Fax : +1 540 345 5091
Flow 1/min
5.5 – 6.5
13.5 – 16.5
18.0 – 22.0
27.0 – 33.0
36.0 – 44.0
45.0 – 55.0
54.0 – 66.0
9.0 – 11.0

Warranty

Email : sales@Altrad Bellegroup.net
21
Max pressure Bar.
180
172
138
138
138
138
138
180