Human Touch Super Novo Manual De Uso Y Cuidado página 5

get ready
PLUG IN THE CHAIR AND POWER IT ON
1. Plug the power cord into a grounded 120-volt outlet.
2. Turn the power switch on the rear of the chair to On.
INSTALL THE MAGNETIC REMOTE/PHONE HOLDER (OPTIONAL)
1. Remove the rubber plug from the remote/phone holder socket.
2. Insert the remote/phone holder into the socket, then turn it clockwise it drops all the way into the socket,
flush with the arm panel.
Rubber plug
humantouch.com
6
INSTALL BATTERIES IN THE BATTERY BACKUP SYSTEM
Your Super Novo comes with a battery backup system, which enables you to incline one time to exit the chair in the event of a
power failure (batteries not included). You will need four high-quality 9V alkaline batteries to power the battery backup system.
To install the batteries:
1. Remove the battery compartment lid from the rear plastic shroud.
2. Attach one 9V battery to each of the four battery connectors.
3. Arrange the batteries so the wires are all facing to the rear.
4. Install the batteries into the battery compartment.
5. Install the battery compartment lid.
Compartment lid
IMPORTANT: Replace the batteries after each use, or once a year if unused.
9V battery
7