Cooper Lighting N175MV Instrucciones página 2

N175MV_325-1511.qxd
C o n g r a t u l a t i o n s. You have purchased a dusk to dawn security light. This fixture
will provide years of convenience and protection for your home or business.
How it works
Your dusk to dawn security light features a light sensor that automatically turns
the light on at dusk and off at dawn.
What you need (not included)
• Screwdriver
• Drill with 3/16" drill bit
• Adjustable wrench
• 1/2" diameter, flexible conduit
• (2) 1/2" conduit connectors
What's included
• Fixture housing (A)
• One-piece lens assembly (B)
• Bulb (C)
• Light sensor (D)
• (2) Lens assembly screws (E)
• (2) Washers (F)
• Access cover (G)
• (4) Hex head lag screws (H)
• Two piece mounting bracket (I)
• Conduit connection cap (J)
• (2) Small screws (K)
• (1) 1/4 - 20 carriage bolt (L)
• (1) 1/4 - 20 hex nut (M)
• Extension arm (N)
What to know
• For outdoor use only.
• cULus Listed for wet location use.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connec tion voids warranty.
• Fixture should be installed by persons with experience in household wiring
or by a qualified electrician. The electrical system, and method of electrically
connecting the fixture to it, must be in accordance with the National Electrical
Code and local building codes.
11/1/05 2:24 PM
Call for customer service and/or missing or damaged parts (800-334-6871)
Page 2
D
A
B
K
L
2
N175MV
N
C
E
G
I
M
F
H
J