Service Notes - Revell Control VR SHOT Manual Del Usuario

Problem: The propellers do not move.
Cause: 1. No connection has been established.
2. The battery is too weak or depleted.
Remedy: 1. Switch everything off and switch on again in the correct sequence (see
point 7).
2. Charge the battery.
Problem: The model stops and descends during flight for no apparent
reason.
Cause: • The battery is too weak.
Remedy: • Charge the battery.
Problem: It isn't possible to control the model using the remote control.
Cause: 1. The ON/OFF switch is in the "OFF" position.
2. The batteries were not inserted correctly.
3. The batteries do not have enough power.
Remedy: 1. Set the ON/OFF switch to the "ON" position.
2. Check whether the batteries are inserted correctly.
3. Insert new batteries.
Problem: The model only turns on its vertical axis or rolls over when
started.
Cause: • Incorrect arrangement of the propellers.
Remedy: • Install the propellers as outlined in the manual (see point 14).
Problem: The model won't fly a flip manoeuvre.
Cause: • Battery too weak.
Remedy: • Charge battery.
Problem: The video image on the display does not play back.
Cause: • No existing WLAN connection
Remedy: • Re-establish WLAN connection
Additional tips and tricks can be found online at www.revell-control.de.
Go to www.revell-control.de for ordering information
and tips on replacing spare parts, plus other useful
information on all Revell Control models.
TROUBLESHOOTING

SERVICE NOTES

www.revell-control.de
25