INSTAllING & REMoVING UV-C bUlb
4. The UV-C Bulb is removed by rotating it one quarter turn and then sliding it out of the
top and bottom lamp sockets (Fig. 4).
bulb is NoT visible
until the bUlb CoVER
has been removed.
FIG. 4
4. The UV-C Bulb is reinstalled by sliding it into the top and bottom lamp sockets and
rotating it one quarter turn (Fig. 5).
IMPoRTANT
:
The UV-C Bulb should be replaced every 10 - 12 months depending on use.
Please contact Germ Guardian Customer Service at 1.866.603.5900 or visit us at
www.germguardian.com to purchase a replacement bulb.
Replacement UV-C bulb: lb5000.
E-10
The CACS should be cleaned at least once every month and the outer Pre-Filter
attached to the Combination Filter should be cleaned every month. More
frequent cleaning may be required depending on environmental conditions.
PRE-FIlTER
Remove the Pre-Filter from the velcro strips on the Combination Filter. (Fig. 6)
Clean with the brush attachment of your vacuum cleaner. This will remove lint and dirt.
After cleaning, reattach the Pre-Filter to the Combination Filter.
TWIST bUlb
1/4 TURN To
REMoVE.
HEPA FIlTER
Remove the Combination Filter from the back of unit.
Remove the Pre-Filter to expose the HEPA Filter.
When the HEPA Filter turns from white to grey or black it should be replaced with a
new one. If the HEPA Filter is still white, it does NOT need to be replaced.
IMPoRTANT
Guardian Customer Service at 1.866.603.5900 or visit us at www.germguardian.com to
purchase a replacement fi lter.
Replacement fi lter: FlT5000.
TWIST bUlb
1/4 TURN To
NoTE
REINSTAll.
Charcoal Filter and Photocatalyst Filter.
FIG. 5
CoMPlETE AIR ClEANSING SYSTEM
Use a clean, dry, soft cloth to wipe the external surface of the unit.
ClEANING & MAINTAINING
THE CoMbINATIoN FIlTER
:
Do NOT try to wash and re-use the Combination Filter. Please contact Germ
: The Combination Filter is one fi lter. The multiple layers include: the HEPA Filter,
NoTE
: Do NOT stick any foreign objects or your fi ngers inside of the unit.
CAUTIoN
: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on
and/or in the unit while cleaning as they will damage the product. NEVER
use alcohol or other solvents.
FIG. 6
E-11