Yakima Tonneau Cover SkyLine Rack Kit Manual Del Usuario página 2

1
OPEN THE COVERS.
3
REMOVE THE CROSSBAR INFILL.
Remove the infill from the underside
of the crossbar and set it aside.
4
SLIDE THE TOWERS ONTO THE CROSSBAR.
Slide the towers into the bottom channel of the
crossbars, making sure the insert is properly seated.
5
INSERT THE PLATES.
Clean your tonneau rails and
their t-slots, then insert 4
A-plates into the track on each
side of your tonneau cover.
Instruction #1036022A-Page 2 of 10
2
ADJUST THE HEIGHT OF THE INSERT.
Use the torque wrench to adjust the height of
the insert to be level with the adapter as shown.
4X 4X
2X
4X
8X