Sensor Operation; Sensorless Operation; Technical Details; Drying Times Average - Sagola CAR 3 Manual De Instrucciones Lista Repuestos

In case the equipment is far away, the light that
is on the right lights. As the equipment gets closer
to the surface to dry, it will be lighting the lights
to the left.
Obtain the optimum working distance when the
green light is on (L1 to L5).
Each of the lights indicates a distance range in
which the equipment is respect to the surface to
treated:
L1: Distances between 30 and 40 cm
L2: Distances between 40 and 50 cm
L3: Distances between 50 and 60 cm
L4: Distances between 60 and 70 cm
L5: Distances greater than 70 cm
In case of not using the distance sensor, disable
it by pressing Button nº1 immediately after
SAGOLA CAR 3
Voltage 220V
Frequency 50/60 Hz
Max. power 3300 W
Minimum working distance 50 cm
Drying surface 1m x 1.40m
Weight 75 kg approx.
PRODUCT
FILLERS
PRIMERS
PAINTS
SOLVENTS
* Note: These are approximate average times.
The product thickness, temperature and %

5. SENSOR OPERATION

6. SENSORLESS OPERATION

7. TECHNICAL DETAILS

8. DRYING TIMES AVERAGE

PRE-DRYING TIME
-
4 - 6 min.
4 - 6 min.
6 min.
In case the equipment is less than 50 cm away,
the equipment will be disconnected automatically
to prevent drying defects.
The function of the sensor can be removed
manually when needed.
By default, the sensor is activated automatically
each time the computer starts a working cycle
(see mode without sensor).
The sensor is located in the front of the screens,
between the two lower.
pressing the start button (Button nº5).
SAGOLA CAR 6
Voltage 220V/380V (3F + N + T)
Frequency 50/60 Hz
Max. power 6600 W
Minimum working distance 50 cm
Drying surface 2m x 1.40m
Weight 95 kg approx.
COMPLETE DRYING T.
10 min.
8 - 10 min.
8 - 10 min.
8 - 12 min.
humidity can vary the drying time of the
aforementioned products.
- 16 -
LIGHT/DISTANCE
Green 50-60 cm.
Yellow 60-70 cm.
Red >70 cm.
Red >70 cm.