Assembly Manual For Car - Sagola CAR 3 Manual De Instrucciones Lista Repuestos

9.5. ELECTRICAL CONNECTION
Connecting the hose to the screens through the
plug at the end of the hose.
9.6. FINAL CLEANING
Once the equipment is fully assembled, it should
be cleaned with compressed air to remove any
residual particles.
10.1. PRELIMINARY CHECKS
Idem Car 3 (page 17)
10.2. UNION BASE-PILLAR
Idem Car 3 (page 17)
10.3. VERTICAL POSITION
Idem Car 3 (page 17)
10.4. PREPARING FOR ELECTRICAL
CONNECTIONS
10.4.1. Enter the estructure of six lamps and
attach with the handle male to the estructure
pilar-arm.

10. ASSEMBLY MANUAL FOR CAR 6

- 18 -
9.7. OPERATIONS CHECKLIST
Connect the equipment and select the switch in
ON position. Check that display of the control
panel lights showing red numbers.
10.4.2. Enter the structure of three lamps by the
end of the arm screw.
1
10.4.3. Ensure the structure with a tightening
wing nut. Structure nº2 is the one that takes the
distance sensor.
2