Amate Audio X210 Manual De Usuario página 40

X210/X215W/X218W3K/X21T Oct 2017
Use the "SW" hole to join one X210 with one X215W or one X210 with TA-X210R
frame.
To tilt the cabinets, both the back-lateral structure and the back guide must be used.
Fig.30. Flying hardware (lateral view)
Fig.31. Back guide with graduation
To block the guides, highly resistant 8mm pins are used with ball safety lock.
To fly X210 units use the TA-X210R frame. It is made from stainless steel. It includes
a centre bar to reinforce the whole structure. The bar has a series of holes that
provide a pickup point for the steel chain slings or the hoists. The pickup point
chosen will determine the tilt angle of the whole array system.
Fig.32. TA-X210R Frame
40
Amate Audio