Maintenance
Dust bin and water compartment
Dust bin
Empty the dust bin every time the robot
completes a cleaning cycle. Remove the
robot's dust bin by pressing the release
button and empty it by opening the
magnetic cover, located on the other
side, using the "OPEN" push buttons.
Then check that there is no dirt obstructing the robot's vacuum
system.
Water compartment
Empty the dust collected during the cleaning cycle and remaining
water from the water compartment and then rinse it with clean
water. Wait until it is dry before using it again.
Regularly check that the water compartment's two drip nozzles are
not obstructed by debris or limescale. Clean them with a soft cloth.
Turn the dust bin over and clean the castor.
For optimum cleaning, remove accumulated
dust and other debris caught around it.
19
EN