EN
Operating the robot
Starting the robot
After attaching the dust bin or
water compartment, switch the
robot on. Press the AUTO button
on the robot or the CLEAN button
on the remote control. The robot
starts its cleaning cycle.
Note:
•
When the robot leaves the home base, it beeps 5 times. The AUTO button indi-
cator light is steady green.
•
If the robot is on standby, press the AUTO button on the robot or the CLEAN
button on the remote control to start a cleaning cycle.
•
The robot's cycle can be interrupted and it can be manually controlled using
the remote control. When you reactivate automatic cleaning, the robot starts
a new path.
Scheduling the robot
With the schedule feature, the robot can start a cleaning cycle at
the time you choose every day of the week. The time and scheduled
time can be reset at any time via the remote control.
Setting the time
Figure 1
CLOCK
AUTO
Figure 2
12