Removing The Battery - Toshiba CAMILEO BW10 Manual De Usuario

Ocultar thumbs Ver también para CAMILEO BW10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing the battery

To remove the battery:
1
While pressing down on the slot cover release latch, slide the
slot cover out and open.
(Sample Illustration) Opening the battery/media card slot cover
2
Slide the battery clip down.
The battery pops out slightly from the slot.
3
Pull the battery straight out.
(Sample Illustration) Removing the battery
4
Close the battery/media card slot cover. Secure the cover by
sliding it back into place.
Close the slot cover and port cover securely.
If any cover is not closed or is not closed completely, the camcorder
will no longer be waterproof. When closing a cover, make sure that
no foreign object such as sand, hair, dust, etc. is caught in the rubber
seal.
Getting Started
Loading the battery
19

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido