D-Link DI-713P Guía De Instalación Rápida página 11

5
Configuring your printer
continued
C) Configuring your printer in
If you are using Windows 2000, please follow these
instructions:
D-Link Local Port
Go to START>
SETTINGS>
PRINTERS.
Right Click on the
printer
icon that corresponds
with
the printer that you
have
connected to the
DI-713P.
Select Properties,
choose
the Ports tab.
Make sure that the
D-Link port is
highlighted
as shown.
Click Configure
Port.
Enter IP address.
Click OK at both
screens.
You have completed configuring your printer in Windows 2000.
D-Link LPT Port
WINDOWS 2000
11