Tabla de contenido
Publicidad
The DI-713P default wireless
settings will work out of the
box with any other D-Link
products.
The factory settings are:
channel: 6
network ssid: "default"
To enable WEP encryption,
select
the encryption type. (Enable
either the 64 or the 128 bit
encryption.)
Then enter the encryption key,
as
shown.
Note: Each key must consist
of 5
pairs of hex digits, which
means
that only digits 0-9 and letters AF
are valid.
Click Save and Restart the computer
to save changes.
3
Checking the connection
to the Internet
To check the connection, open the
web browser and go to your
favorite website.
If you are unable to browse,
please do the following:
1. Refer to Appendix B to check
your connection to the wireless
router.
2. Use "Help" on the Main
Menu.
3. Refer to the troubleshooting
section in the user's manual.
5
Publicidad
Tabla de contenido
