Logan L-SA01 Manual De Usuario página 18

Ocultar thumbs Ver también para L-SA01:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

all the setting messages will be sent to fi r st SMS number.)
6.4. Arm/Di s arm
Arm: Password + A1
Disarm: Password + A2
For example: Initi a l password is 1234, arm remotely by sendi n g SMS: 1234A1
Alarm host replies with "Panel armed", the message wi l l be sent to the 3 alarm SMS numbers.
7. Cautions
1. Keep away from water.
2. Install host in hidden place wi t h good Wi F i and GSM si g nal.
3. Turn Off power when i n sert/take out the SIM card.
4. Connect power adapter well and keep good heat di s si p ati o n.
5. Enter i n to normal running status about 12 seconds later.
6. Check all the detectors batteries i n time and charges them when battery i s low.
7. Don't i n stall alarm host close to the objects with strong interference, such as TV, computer etc.
8. Regularly check the SIM cad in the alarm host (Check GSM si g nal, balance, etc.)
9 Inspect the alarm systems operation regularly.
10. The smart mobile phone for i n stalling APP should keep the network unblocked, i n case i n formati o n can't
arrive i n ti m e.
11. Desi g n for i n door use rather than outdoor.
8. How to reset the Gateway to factory default.
Please switch off the power of gateway, hold pressi n g the REC button (the REC button i s on the back of
gateway),switch on power at the same ti m e, i t wi l l be reset successfully after the gateway make 3"di , di, di"
beep sounds. You could setup the gateway again for 25s later.

Publicidad

Tabla de contenido
loading

Tabla de contenido