Fluidmaster K-400H-021 Guía De Inicio Rápida página 11

STEP 12: FINE-TUNE BOWL WATER LEVEL
A: FILL BOWL WITH A GALLON OF WATER
Wait 1 minute until the bowl water level recedes
down and stops.
B: MARK THE WATER LEVEL IN THE BOWL
With a pencil, draw a line at the top of the water level
in bowl. (Pencil mark will easily wash off).
C: FLUSH TOILET TO CHECK BOWL
WATER LEVEL
If the water level matches the line you've made in
the bowl when the fill valve stops filling the tank,
the water level is correct, proceed to Step 13.
If the water level matches the line in the bowl and the
fill valve is STILL FILLING, then the bowl water is
TOO HIGH, proceed to Step 12D.
If the valve shuts off and the water level does NOT
match the line in the bowl, the water level is TOO
LOW, proceed to Step 12D.
D: ADJUST THE BOWL WATER LEVEL
TOO HIGH:
Turn the dial clockwise.
TOO LOW:
Turn the dial counter-clockwise.
E: FLUSH TOILET,
CHECK BOWL WATER LEVEL
Repeat Steps 12D and 12E until water level in bowl
matches the line when the fill valve shuts off.
20
TOO HIGH
TOO LOW
LESS WATER
MORE WATER
STEP 13: FLUSH THE TOILET
A: FLUSH THE TOILET
If you're satisfied with the flush, YOU'RE DONE!
YOU DID IT!
We knew you could!
Share your success story
with friends and family!
#FixedMyToilet
#Fluidmaster
Still not working exactly right?
See the next page for Troubleshooting.
21