VORAGO HPB-100 Manual De Usuario página 11

INSTRUCTIONS FOR USE
Before you start using your headphones, you must fully
charge them and connect them with a compatible phone
or device.
Battery charge
1. This device has a built-in rechargeable internal battery.
Do not attempt to remove the battery from the
device, as it may damage the device.
2. The headphones will emit an intermittent beep and red
flash indicator when the battery is low and requires
recharging.
3. Connect your Micro USB charging cable to the charging
port of your headphones.
4. Connect the other end of the USB cable to a charger.
5. The red indicator light comes on indicating that the
headphones are charging.
6. The red indicator light turns off when the headphones
are correctly charged (approximately 1-2 hours).
To use the headphones wired, connect the cable to the 3.5
mm Jack and the other end to your music player. It is not
necessary to charge the hearing aid battery for this option.