VORAGO HPB-100 Manual De Usuario página 12

Note: The LED light function will not work if the battery is
not charged.
SYNCHRONIZATION
Pair your bluetooth device
To turn on your headphones, press the power button for 5
seconds, do not release the button until the blue light turns
on and / or red and blue lights flash this indicates that the
headset is in pairing mode. Now you can use your mobile
phone to connect to the device. Note: It is only possible to
pair it with only 1 device at a time.
To pair a device other than the originally paired, turn off the
BT of the previously paired device and search the HPB for
your new music player and follow the previous instructions
for use.
• Consult the user manual of your device to activate the
BT and put it in detection mode. If the device requests a
password Enter 0000.
The blue led of the device will turn on. This will indicate
•
that it is connected and running.
Once linked you can play music directly from your device.
•
Maximum distance between devices is 10 m without
•
barriers.