Troubleshooting - Workshop PP0100VA0 Manual De Propietario

PRobLEM
Vacuum Does Not Start.
Low Suction.
WARNING: If any of the power head assembly parts should become
detached or broken, exposing motor or any other electrical components,
operation should be discontinued immediately to avoid personal injury or
further damage to the vacuum. This vacuum has no user serviceable parts,
except the Filter.

TRoUbLESHooTING

PoSSIbLE CAUSE
Not firmly plugged in.
Bucket full.
Filter is dirty.
Power head not
installed correctly.
Obstruction in Hose.
PoSSIbLE SoLUTIoN
Plug in firmly.
Empty bucket.
Shake dust out of Filter or
wash it if necessary. See
"Filter Maintenance" Section.
Be sure the power
head seats properly.
Connect the hose to
the blowing port until
hose is clear.
10