Installation; Remote Control - Noaton TRITON Manual De Uso

3 Installation

1) Mount the supplied mounting bracket to a suitable place on the ceiling or wall using the supplied
dowels and screws.
2) Disconnect the household power supply. This will prevent the risk of electric shock.
3) Connect the conductor from the home circuit to the corresponding conductors coming out of the
fan.
4) Fix the fan body to the mounted bracket with the screws. Make sure that the conductors are not
pinched in any way.
5) Check that the screws are properly tightened.
6) Restore the power supply.
7) The fan is ready for use.

4 Remote control

The remote control does not require pairing so you may use it immediately upon installing the fan.
Because it is infrared, you can control multiple fans of the same model at once with a single remote
control, provided that they are within its range.
Given the nature of the infrared signal, the controlled fan must be ideally up to 4 m away from the
remote control. If the distance is longer, the signal may be attenuated or lost. It is also necessary to
ensure that there are no obstacles between the remote control and the fan and that the remote control
points its upper end (where there is the IR diode) directly to the fan. This is the only way to ensure
trouble-free operation and the maximum user experience with this fan.
EN
28