Operating The Instrument - Riester HL 150 Manual Del Usuario

4.

Operating the instrument

Mains switch
The instrument is switched on using the mains switch (3).
The mains switch has two setting positions
If the instrument is switched on, a green control lamp lights up in the switch.
Adjusting the light output
The output of the light source can be infinitely varied by turning the control knob (2).
Turning to the left reduces the
Connecting the fibre optics
The instrument is supplied with a Storz adapter as standard.
Connection for potential compensation
The instrument is fitted with a plug-in device (4) according to DIN 42801 for connecting a potential compensator, which is used to earth
the instrument if it is operated in rooms of the application class 1 or 2E.
The potential compensation connection is to be connected via a respective earth cable to the central potential compensation of the ope-
rating theatre or the instrument trolley.
Mains fuse
Mains connection
The plug of the mains connecting lead is attached to this mains connection (5).
Caution: It is essential to use the earthed mains cable supplied.
4
ON switched on
OFF switched off
light output
The fibre optics are connected here (1).
(4) Potential compensation connection
(6) Mains fuse
(5) Mains connection
Turning to the right increases the
light output