Combination Disc - Philips HR1377 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
10
Press the lid release button on the bowl (1) and turn the lid clockwise to remove it
(2). (Fig. 11)
tips
-
The appliance chops very quickly. Use the normal speed button or the turbo speed button. If
you use the turbo speed button, use it briefly to prevent the food from becoming too finely
chopped.
-
Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise
these ingredients become too hot, start to melt and turn lumpy.
-
Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and
ice cubes, as this may cause the blade to get blunt.

combination disc

The combination disc is intended for slicing and shredding vegetables like cucumber, carrots,
potatoes, leek and onions and certain kinds of cheese. One side is intended for slicing and the other
side for shredding. You can switch from slicing to shredding and the other way round by simply
turning the disc.
Never process hard ingredients like ice cubes with the disc.
The cutting edges of the disc are very sharp. Do not touch them.
1
Place the tool holder in the bowl (Fig. 7).
2
Place the combination disc on the tool holder with the slicing or shredding side facing up,
depending on the result you want. (Fig. 12)
3
Put the lid on the bowl (1). Turn the lid anticlockwise (2) to fix it ('click') (Fig. 9).
4
Put the ingredients in the feeding tube.
-
Pre-cut large ingredients into chunks that fit in the feeding tube.
-
Fill the feeding tube evenly for the best results.
-
When you have to process a large amount of ingredients, process small batches and empty the
bowl between batches.
-
To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator
temperature.
5
Fasten the motor unit onto the lid of the bowl ('click') (Fig. 10).
6
Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
7
Press the pusher lightly onto the ingredients in the feeding tube.
Whisk
The whisk is intended for whipping cream, whisking egg whites, desserts etc.
1
Connect the whisk to the coupling unit (Fig. 13).
2
Connect the coupling unit to the motor unit ('click') (Fig. 14).
3
Put the ingredients in a bowl.
Tip: Use a large bowl for the best result.
EnglisH
9

Publicidad

Tabla de contenido
loading

Tabla de contenido