Setup; Ystem Etup; Putting The System Together; Step 1: Set Up The Speaker Array - Bose LIFESTYLE 135 Guia De Instalacion

Ocultar thumbs Ver también para LIFESTYLE 135:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

S
S
YSTEM
ETUP

Putting the system together

Note: The LIFESTYLE
wide, spacious sound. For best sound quality, the speaker array should not be placed inside
a cabinet, or diagonally in a corner.
Note: To avoid wireless interference, keep other wireless equipment, such as wireless
computer network routers, cordless phones, microwave ovens, or other WIFI-enabled
audio/video devices away from the speaker array and Acoustimass
Step 1:
Set up the speaker array
What you need:
Speaker array
A. Lay the speaker array grille-side down on the table in front of your TV.
Note:
To protect the surface of your table you may want to put a protective cloth under the speaker
array until setup is complete. The foam bag removed from the speaker array could be used for this
purpose.
Note:
Be sure to remove all protective films from the speaker array before operating the system.
They may affect acoustic performance if left in place.
B. Plug the audio input cable into the connector labeled Audio In on the speaker array.
Make sure the flat surface with the arrow on the plug faces up.
8 – English
®
135 system uses the reflective surfaces of your room to deliver
Audio input
Power cord
cable
Speaker array
Audio input cable
®
module.
OPTIONAL:
Speaker array
feet

Publicidad

Tabla de contenido
loading

Tabla de contenido