Tyco KANTECH Intevo-CMP-1TB Guía De Configuración Rápida página 13

6-
Click on INTEVO Camera registration
7-
Enter your email address. A copy of the license key will be sent to
this address when the process is completed.
8-
Enter the following information:
•
INTEVO-IPCAM01 serial number
•
INTEVO Server MAC address (see step 4 above)
9-
Click "REGISTER".
10-
If you are activating multiple camera channels, click "Click here to
create an additional key" and enter the other the additional
information.
11-
Take the "KEY" information and go to: Configurations / HDVR
server / System Setup in the HDVR software.
12-
Enter the "KEY" information in the "LICENSE" field and click
"APPLY".
13-
Your INTEVO camera channels are now activated and ready to use.
NOTE: INTEVO IP channel registration can be done through the web
browser on the INTEVO or by any other computer with a connection to
the internet. If these options are not available, please contact Kantech
Technical Support for assistance.
11