Hitachi RAK-18PSB Manual De Instrucciones página 34

All manuals and user guides at all-guides.com
WEEKLY TIMER OPERATION
Step 3: Copy and cancel the reservation schedule.
1
2
3
4
5
6
8
NOTE
If there is no reservation data, copying data from one day to another day cannot be done.
●
■ How to copy and paste.
Editing the reservation schedule is easy by copying data from one day to
another day.
1. Press (WEEKLY) button to select Mode A or Mode B.
2. Press (WEEKLY) button for about 3 seconds to start editing the
reservation schedule.
3. Press (DAY) button to select a day of the week to copy.
4. Press (COPY/PASTE) button. Then "PASTE" blinks on the display.
* Press (CANCEL) button to cancel the COPY mode. Normal
setting mode is activated.
5. Press (DAY) button to select a day of the week to paste.
6. Press (COPY/PASTE) button one more time to paste.
blinks on the display.
7. To continue copying to other days, press
.
Then start from step 3.
8. After copy and paste completed, press
directing the remote controller towards the indoor unit for about 3 seconds.
Timer lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
Please ensure that the TIMER lamp lights up.
If TIMER lamp does not light up, Press
Reservation data will not change if
●
– 27 –
only
or or or
(SEND) button while
(SEND) button again.
(SEND) button is not pressed.