Hitachi RAK-18PSB Manual De Instrucciones página 38

All manuals and user guides at all-guides.com
OPERATION MODE LOCK
The remote controller can be set to fix the HEATING mode (including FAN), COOLING mode (including FAN)
and DEHUMIDIFYING mode (including FAN) operations.
■ Method to lock HEATING mode (including FAN) operation.
Press
when the remote controller is OFF.
"
will remain.
This indicates that HEATING mode operation is locked.
When pressing
■ Method to unlock HEATING mode (including FAN) operation.
Press
when the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds. After
that, operation mode symbol before cancellation will be displayed.
This indicates that HEATING mode operation is unlocked.
■ Method to lock COOLING and DEHUMIDIFYING modes (including FAN)
Press
when the remote controller is OFF.
"
"
This indicates that COOLING and DEHUMIDIFYING mode operation is locked.
When pressing
displayed.
■ Method to unlock COOLING and DEHUMIDIFYING modes (including FAN)
Press
when the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds. After
that, operation mode symbol before cancellation will be displayed.
This indicates that COOLING and DEHUMIDIFYING modes operation is unlocked.
NOTE
●
Operation Mode Lock function will not activate if TIMER reservations activate.
TIMER reservations shall be deactivated first. Then, Operation Mode Lock function can be activated.
● HEATING, COOLING and DEHUMIDIFYING mode (including FAN) operations can be unlocked by pressing
the (RESET) button. However, by pressing the
in the remote controller will disappear. You may need to set the necessary information again.
(ECO) and (POWERFUL) buttons simultaneously for about 5 seconds
", " " and " " will be displayed for about 10 seconds. Later, "
(MODE) button, "
(ECO) and (POWERFUL) buttons simultaneously for about 5 seconds
operations.
(ECO) and (SILENT) buttons simultaneously for about 5 seconds
", " ", " " and " " will be displayed for about 10 seconds. Later, "
" will remain.
(MODE) button, "
operations.
(ECO) and (SILENT) buttons simultaneously for about 5 seconds
– 31 –
", " ", " " or " " will be displayed.
", " ", " ", " " or "
(RESET) button, all the information stored
" and " "
" and
" will be