Alesis CORE 1 Guía De Usuario página 5

Audio Setup
Core 1 is a class-compliant device that can be used with any digital audio workstation or recording
software that supports USB audio. To enable your Core 1 to send and receive audio to and from
your computer, see the following instructions for your computer's operating system.
Be sure your audio software program is set up to receive audio from Core 1. This can usually be
done in your software's Preferences, Device Setup, or Options. Please consult your software
manual for more information.
Important: Core 1 will appear in your software as an audio device that can support two-channel
input and two-channel output. The input channels are identical, so you can select either one in your
software. The output channels are a standard "left-right" stereo channel pair.
Windows 8:
1. Use the included USB cable to connect the Core 1 to your computer.
2. Go to the Start Menu, click the lower-left corner of the screen to go to the Desktop.
3. In the Taskbar, locate the Volume Control "speaker" icon. Right-click the speaker and select
Playback Devices.
4. In the Windows Sound control panel select the Playback tab and select Core 1 as the
default device.
5. Click the Recording tab and select Core 1 as the default device.
6. Click Properties in the lower right-hand corner.
7. In the new window, click the Advanced tab and select 2-channel, 24-bit, 48000 Hz (Studio
Quality) as the default format.
8. Uncheck both boxes under Exclusive Mode.
9. Click OK to close the Properties window.
10. Click OK to close the Sound control panel.
5