Replacing The Battery-Status Light Cable With Microphones; Procedure; Requisitos Posteriores - Dell XPS 13 Manual Del Usuario

Replacing the battery-status
light cable with microphones
AVISO: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
inside your
instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTA: The battery-status light cable with microphones is an assembly that
includes LED indicators and digital-array microphones.

Procedure

1 Using the alignment posts, place the battery-status light cable with microphones
on the palm-rest assembly.
2 Route the battery-status light cable with microphones through the routing
guides and adhere it to the palm-rest assembly.
3 Adhere the tape that secures the battery-status light cable with microphones to
the palm-rest assembly.
4 Slide the battery-status light cable with microphones into the connector on the
keyboard-controller board and close the latch to secure the cable.
5 Adhere the tape that secures the battery-status light cable to the keyboard-
controller board.

Requisitos posteriores

1 Coloque la batería.
2 Coloque la cubierta de la
44
computer. After working inside your computer, follow the
After working inside your
base.
Before working
computer. For more safety best
www.dell.com/