Epson XP-231 Guia De Instalacion página 3

XP-231
Start Here
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
2
Turn on and configure
1
3
2
3
Install ink cartridges
Caution: Keep ink cartridges out of the reach of children and do not drink the ink.
1
2
1
4
Load paper
3
1
2
Caution: Do not connect to
your computer yet.
2
4
1
2
Remove only the yellow tape from
each cartridge.
Note: Do not remove any other seals
or the ink may leak.
Caution:
ink. Wait for ink priming to complete before installing the software.
Note:
•
4 minutes
•
Press the stop button to
prime the ink delivery system.
Priming takes about 4 minutes.
Letter or A4
4 × 6-inch
(102 × 152 mm)
Read these instructions before using your product.
3
Note: If all of the printer lights are flashing, an error
has occurred. Turn off the printer, lift the scanner unit
and remove any protective material that has been
left inside. Then turn the printer back on.
Don't turn off the printer while it is priming or you'll waste
The printer is designed for use with Epson cartridges only, not
®
third-party cartridges or ink.
The cartridges included with the printer are designed for printer
setup and not for resale. After some ink is used for priming, the
rest is available for printing.
English