Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Front panel
1. POWER: allows you to turn off the device. Press it (if it asks for a password, select the
admin account and enter the password 123456), and use the mouse or the selection button
to select OK.
2. MENU: press to enter the main menu.
3 REC/STOP: press to start / stop recording.
4.
: press to start playback of stored videos.
5.
: press to stop playback. During pause mode, press to advance frame by frame.
6.
: press to go to the end of the video file.
7.
: press and hold for fast reverse.
8.
: press and hold to fast forward.
9. PTZ: Press to enter the control mode of PTZ cameras.
10. ESC: Use to return to the previous option or close the current menu.
11. Arrow keys: press to scroll the menu options.
12. Select key: press to confirm an option.
13 LCD POWER: Use to turn off the screen without turning off the DVR.
14. Status indicators.
Rear panel
1. V-out: connect an external monitor.
2. Video In: Use these 4 connectors to connect the video signal from the cameras.
3. DC OUT: Connect here the cameras power cables.
4. A-OUT: audio output port.
5. Audio In: Connect the audio output of the cameras.
6. Main switch.
7. DC12V: Input power. Connect the included power adapter.
8. ALARM IN, COM GND, RS485: Connector for alarm and PTZ cameras.
9. USB/MOUSE: allow you to connect a mouse and a USB drive for backups (only in the
upper port).
10. Net: Network port.
11. VGA: It allows you to connect a monitor using a VGA cable.
12. : ground.
4 4
Publicidad
Tabla de contenido
