Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting: Alarm, buzzer, duration and pre-record output.
● Output: when an alarm is triggered, the alarm time will be 0, 10, 20, 40, or 60 seconds.
● Buzzer: when the alarm is active can be configured for 10, 20, 40, or 60 seconds.
● Duration: initial setting of 30 seconds, 1 minute, 2 minutes and 5 minutes.
● Pre-record close / open.
E-mail Setup
Email: turn on or off.
Activate: open
Disable: close
SSL: Enabled or disabled. It is a security
link transport protocol. You can encrypt your
communication information (including your email
address); use SSL to prevent that externally
handling information, including your password.
Please confirm with your service provider's email
if your server supports SSL or not.
SMTP port: The specified sender's SMTP server port (forwarding Server / Host)
In general, the value of the SMTP port is 25, but Gmail SMTP server port is 465.
* If your email address has to be verified by SSL, the port will be 465 (default value), and port
25 (the default) is the email without SSL verification.
SMTP server: Simple (SMTP) mail transfer protocol, is a standard internet e-mail;
transmission is through Internet Protocol (IP) networks.
Sender Email: The original sender (forwarding Server / Host).
Sender Pswd: Password for the original sender.
Receiver Email: Alarm notification target receptor.
Interval: 3, 5 and 10 minutes.
Press Apply to save the new settings and exit to return to the previous menu.
21
21
Publicidad
Tabla de contenido
