1. Remove the batteries from the battery compartment and wait
a moment.
2. Reinsert the batteries. Observe the correct polarity of the
batteries (+/-).
3. Proceed as described in the chapter "Receiving the time
signal".
Cleaning
− If necessary, dust the item with a soft, dry cloth or wipe it
with a slightly moistened cloth.
Fault/Remedy
DCF77 signal is not received.
Check the selected location.
If necessary, start the radio reception manually.
Set the time manually.
Temperature indication appears too high.
Check whether the alarm clock is exposed to direct sunlight.
50
DCF Radio-controlled alarm clock CK 1700