Astralpool WATERHEAT EQUIPADO 20kW Manual Tecnico página 15

WATERHEAT SERIES · WATER/WATER SYSTEM
Internal parameter code is showing below:
SORT CODE
F11
F12
F13
TEMPERATURE
F14
F18
F19
F21
WATER PUMP
F29
F31
F32
---
F33
F34
F40
F41
FILTRATION
F42
F50
ALARM
F59
F60
F61
F62
F63
---
F64
F65
F66
F69
F80
F81
F85
SYSTEM SETTING
F86
F87
F98
TESTING
F99
END
Basic Operating Principle
Temperature controlling
The controller has a temperature controlling mode.
Temperature controlling point is controlled by "setting temperature (F11, or press the "set" key
for some time to set and temperature difference "(F12)".
© ASTRALPOOL 2018 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
PARAMETER NAME RANGE
Setting temperature F14  F13
Differential temp. 0,1  20
Max temperature
-58  302
setting
Min temperature
-58  302
setting
--- ---
Temp probe
-20  20
adjustment
Water pump delay 0  10
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Filtration starts time
1  10
before water pump
Filtration stop time
0  10
after water pump
External alarm mode 0 to 4
Buzzer alarm sound off – 0,1 
duration 1,0 - on
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
off – 0001
Password
 9999
Temperature units ºC / ºF
Display accumulative
---
running time
Accumulative running
---
time reset
off – 0001
Probation time
 9999
Reserved ---
This function can attract all relays in turn; please do not use when the
Set test
exit
ENGLISH
FACTORY
UNIT
SETTING
The setting range is limited by
28 ºC / ºF
F13 and F14.
Refer to the temperature
1,0 ºC / ºF
controlling.
Controller will follow the rule:
35 ºC / ºF
F14<F11<F13. If one parameter
cannot be adjusted is because it
10 ºC / ºF
is limited by another parameter.
--- ---
0.0 ºC / ºF Adjusts probe temperature.
3 min
--- ---
--- ---
--- ---
--- ---
--- ---
1 ---
3 min
3 min
0:without external alarm
1:always open, unlocked
0 --- 2:always open, locked
3:always closed, unlocked
4:always closed, locked
Off: No alarm sound
0,5 min On: Alarm sound always on until
pressing a key
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Off: no password
off ---
0000: means clearing password
ºC: Centrigrade
ºC ---
ºF: Fahrenheit
--- hour
--- ---
The controller will stop if the
accumulative time is over
off hour probation time and show the
alarm code "A99"
Off means no probation time
--- ---
controller is running.
REMARKS
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
15