Epson C824431 Manual Del Usario página 10

DIP switch 1 (interface operations)
The table below contains information on switch functions,
and the factory setting of each.
Table 1. DIP switch 1
Switch
number
I/F card enable/disable
1-1
(Note)
1-2 Word length
1-3 Parity check 1
1-4 Parity check 2
1-5 Baud rate 1
1-6 Baud rate 2
Note
Some printers have a selecting switch (or function) that
allows you to select between the optional and original
interfaces. If you install the interface card in this type of
printer, you should set DIP switch 1-1 on the interface card
to ON and also change the setting in the printer to select the
optional interface.
Function
6
ON OFF
Enable Disable
8 bit 7 bit
See Table 4.
See Table 5.
Factory
setting
ON
ON
OFF
OFF
ON
OFF