Directions For Use - Weston 83-0750-W Manual De Instrucciones

DIRECTIONS FOR USE

WARNING!
appliance, make sure the appliance is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
1. Make sure the
Blade Locking Screw
is properly tightened.
Rotate the Blade
Locking Screw
counter-clockwise to
tighten.
2. Make sure the
Blade Protector is
secure and in place
to make sure the
blades sits correctly
as it spins. This
part is necessary to
ensure that the meat
slicer works at 100%
capacity.
3. Place the Meat
Slicer on a flat stable surface. Be sure the Power Switch is in the "O" off
position. Plug the appliance into a properly rated electrical outlet (120V AC,
60Hz).
4. Place a tray or plate behind the Meat Slicer and below the Blade to collect
the sliced food as it exits the Blade area.
5. Place food on to the Sliding Food Carriage between the Gauge Plate and
the Food Pusher. To avoid danger of injury, ALWAYS use the Food Carriage
and Food Pusher while slicing (Figure 2).
Before cleaning, assembling or disassembling the
Food
Food
Pusher
Sliding
Food Carriage
Gauge
Plate CAUTION!
SHARP BLADE!
FIGURE 2
Blade
Locking
Screw
7