Electrical Connections; Maintenance; Cleaning The Outside Of The Unit; Cleaning The Air Intake Filter - CLIMAVENETA i-LIFE SLIM 102 Instalación - Usuario - Manual De Mantenimiento

ELECTRICAL CONNECTIONS

Make the electrical connections following the instructions
shown under General warnings and Fundamental safety
rules, with reference to the diagrams provided in the acces-
sory installation manuals.
Before performing any work, make sure that power is dis-
connected.

MAINTENANCE

Periodical maintenance is essential to ensure efficient, safe
and reliable operation of the fan coil over time.
Some maintenance operations are required every six

CLEANING THE OUTSIDE OF THE UNIT

Before any cleaning and maintenance work, disconnect
the unit from the mains power supply, switching off the
mains switch.
Wait until the components have cooled down, to avoid
the danger of burns.
Do not use abrasive sponges or abrasive or corrosive
detergents, to avoid damaging the painted surfaces.
When required, clean the outside surfaces of the fan coil
using a soft cloth dipped in water.

CLEANING THE AIR INTAKE FILTER

After a period of continuous operation, based on the con-
centration of impurities in the air, or alternatively when
Remove the filter cells
- remove the front grill by lifting it slightly and turning it until
it is completely released;
A Front grill C Filter
B Grill housing D Filter removal
A
The appliance must be connected to the power supply via a
disconnect switch with minimum contact opening of 3 mm,
i.e. a device that ensures complete disconnection of the
appliance
months, others once a year, carried out by authorised and
trained personnel from the Technical Service and using orig-
inal spare parts when required.
restarting the system after a long period of inactivity, pro-
ceed as follows.
- remove the filter, pulling it outwards horizontally.
B
C
EN 05/2013 i-LIFE SLIM
I A
I A
I A
I A
11