Note From The Manufacturer; Overview; Status Indicator - Leviton Level 2 Manual De Instrucciones

NOTE FROM THE MANUFACTURER

This document provides instructions for this Level 2 EVSE Charging Station and should not be
used for any other product. Before installation or use of this product, review instructions carefully
and consult with a licensed contractor, electrician, or trained installation expert to ensure
compliance with local building codes and safety standards.

OVERVIEW

Status Indicator

Power Charging
(Green LED) (Yellow LED)
OFF
ON
ON
ON
ON
ON
READY
CHARGE
FAULT
STATUS INDICATOR
Fault
(Red LED)
OFF OFF
OFF OFF
ON OFF
Flashing OFF
OFF Flashing
OFF ON
NEMA 6-30
AC Power Plug
Release
Button
When the EVSE Charging Station is not
energized, all indicator LEDs are OFF.
Power indicator LED illuminates green when
plugged into AC power outlet. Charging connector
is not yet coupled with electric vehicle charge port.
Charging connector is correctly coupled with
electric vehicle charge port. Charging is not yet in
progress.
Electric vehicle charging in progress.
EVSE Charging Station is recovering from a minor
fault. Wait until Fault indicator LED turns OFF to
resume charging.
EVSE Charging Station malfunction.
Stop using immediately. Unplug AC power plug
from outlet.
J1772
Charge
Connector
Charge
Connector
Cord
Status
TM
2