Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
The X3 EX range consists of high performance UPS units with direct connection to the PC
via a USB port. The UPS is Auto-Regulated to provide balanced output power and offers
complete protection for your servers and their peripherals in the event of power cuts or
fluctuations. If power failure due to power cuts, power surges, or transient over-voltage
occurs, the UPS will very rapidly transfer your computer equipment to an alternative power
supply. This will allow you to make a backup, close your program(s) and shut the system
down correctly. In normal power supply conditions, X3 EX will maintain its battery charge in
an on-going way to become completely transparent during all your operations. In other
words, this kind of uninterruptible multifunctional power supply will simplify your tasks. You
will be able to check its operating status quite easily as well as its charge level using the
LCD screen. This high-technology UPS ensures that your computer equipment has a proper
and reliable power supply. The main features of the X3 EX range are given below.
2 . M A I N C H A R A C T E R I S T I C S
 A highly-reliable microprocessor control
 Automatic output voltage regulator (AVR)
 Built-in USB communication port
 Input voltage regulation and standardization
 Cold start feature if no power supply
 Off-mode charging
 Green Power Function for energy saving
 Automatic restart during AC power recovery
 Compact size, lightweight
 Phone / modem or network surge protection (RJ45 connectors)
3 . S A F E T Y I N S T R U C T I O N S

IMPORTANT!

Save this manual properly and read carefully the following instructions before installing the
unit. Do not operate this unit before reading through all safety information and operating
instructions carefully. Installation and Wiring must be performed in accordance with the
local electrical laws and regulations. Installing and connecting UPS system in a way that
does not comply with accepted practices releases Infosec Communication from any
liability.
Transportation
1.
Please transport the UPS system only in the original package to protect against shock
and impact.
Preparation and good disposals of the device:
1.
Condensation may occur if the UPS system is moved directly from cold to warm
environment. The UPS system must be absolutely dry before being installed. Please
allow at least two hours for the UPS system to acclimate the environment.
2.
Do not install the UPS system near water or in moist environments.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
2
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 18 AA 59 205 10

User guide

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

X3 ex lcd usb 600X3 ex lcd usb 800X3 ex lcd usb 1000X3 ex lcd usb 1200X3 ex lcd usb 1600X3 ex lcd usb 2000 ... Mostrar todo

Tabla de contenido