Sauder Pinwheel 421885 Manual Del Usuario página 13

Step 9
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D14 and D15).
å
Fasten the DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D14)
å
and the DRAWER LEFT (35AD) to the LEFT DRAWER SIDE (D15). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
NOTE: The glides are not intended to rotate.
å
2
www.sauder.com/services
Glide end
1
D15
GOLD 5/16" FLAT HEAD SCREW
VIEW THE DRAWER GLIDE VIDEO
10A
3S
(4 used in this step)
421885
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Glide end
D14
1
2
Page 13