Top - Sauder Pinwheel 421885 Manual Del Usuario

Step 4
Insert one METAL PIN (1R) into the hole in the top surface
å
of the TOP (C).
Fasten the TOP (C) to the LEFT END (B). Tighten two
å
TWIST-LOCK® FASTENERS.
NOTE: Be sure the METAL PIN (1R) in the TOP (C) inserts
å
into the BRACE (E).
Curved edge
Page 8
Top surface
C
i t h
e w
f a c
C K
S u r
- L O
I S T
E R S
T W
T E N
F A S
421885
How to use the SAUDER TWIST-LOCK® FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
E
1R
®
B
Dowel end
www.sauder.com/services