GE GPF310 Serie Instrucciones De Instalación

Installation
Instructions
BEFORE YOU BEGIN
STOP
Read these instructions completely
and carefully.
IMPORTANT
tions for local inspector's use.
IMPORTANT
codes and ordinances.
Note to Installer – Be sure to leave these
instructions with the Consumer.
Note to Consumer – Keep these instructions
with your Owner's Manual for future
reference.
WARNING:
To prevent electric shock, disconnect electri-
cal power supply to dishwasher before
changing panels. Do not operate dishwasher
while changing panels or when lower access
panel assembly is removed.
1 REMOVE LOWER ACCESS PANEL
ASSEMBLY
• Remove the two screws below the access
panel. Retain screws.
• Loosen the two screws located between the
door and the access panel.
• Remove the access panel assembly from the
dishwasher and discard.
• Remove the toekick and set aside.
Note: Do not remove the insulation behind the
toekick.
– Save these instruc-
– Observe all governing
DOOR AND ACCESS PANEL
COLOR CHANGE KIT
GPF310 and GPF410 Series Kits
GPF310A, GPF410A – Almond panels
GPF310B, GPF410B – Black panels
GPF310C, GPF410C – Bisque panels
GPF310W, GPF410W – White panels
GPF410S – Stainless Steel
TOOLS AND MATERIALS
REQUIRED:
• 1/4" socket driver
• Phillips screwdriver
• Safety Glasses
• Gloves to protect against sharp edges
The GPF310 and GPF410 series trim kit is
designed to provide a color change or to
conceal minor damage to original dishwasher
door and access panels.
The new door panel cover provided in this kit
is designed to completely cover the existing
dishwasher door. Do not remove the original
door panel. 2 screws are provided for easy
installation.
This kit also provides a replacement access
panel assembly. The original access panel
assembly should be removed, discarded and
replaced with this piece.
Escutcheon Escutcheon
Door Door
Panel Panel
Loosen 2 Screws
Loosen 2 Screws
Access Panel Access Panel
Toekick Toekick