Technical Data; Also Available - Marmitek CONNECT 236 Modo De Empleo

TECHNICAL DATA

General
Power requirements:
Power consumption:
Dimensions:
Mass:
Inputs/Outputs
Inputs on the front:
Inputs on the back:
Outputs on the back:
Product modifications may take place without prior notice

ALSO AVAILABLE

1. Wireless audio and video
You can connect a product from the Marmitek GigaVideo
series to the OUTPUT or REC1/REC2 connection of the
Connect 236 to transmit the audio and video signal wirelessly
throughout the entire house. This means you can also
transmit the signal to a TV in another room and watch the
signals from every device connected to the Connect 236.
The built-in infrared return channel of the GigaVideo series
also means you can control the equipment and the Connect 236 remotely, even through
walls and ceilings!
2. Control your Connect 236 and A/V equipment that
is out of sight.
Marmitek offers a range of products to control your equipment
in a closed cabinet or from a different room, both wired and
wireless.
For these so called infrared extensions, more information can
be found at: www.marmitek.com.
3. Audio and video via the coax
The Marmitek MegaVideo products give you the possibility to
add the OUTPUT or REC1/REC2 signal of your Connect 236 as
an extra channel to your coax cable. You can watch the signal of
every device connected everywhere in the house where there is
a coax connection. The built-in infrared return channel of model
14
AC 9V 500mA
2W
285mm X 260 mm X 55 mm
2Kg
Ch6= 1 x RCA Video, 2 x RCA Audio (L+R)
CH1-5 = 5 x Scart, 3 x Coaxial RCA audio
OUTPUT, CH2, CH3 = 3 x Scart, 1 x RCA Video, 4 x RCA
Audio (2 x L+R), 1 x RCA Coaxial audio
© MARMITEK