Vision TM-1200 El Manual Del Propietario página 8

ASSEMBLY FOR CLOSE-COUPLED CONFIGURATION:
1. ATTACH TO CEILING Fit top part of tilting mechanism to ceiling plate, then fix top yoke to
ceiling.
Ensure the correct fixtures are used to attach the Techmount to the wall or
ceiling. The fixtures provided are ST8x50 bolts with 10mm plastic inserts for
attachment to masonry. They may not be suitable for your application.
2. ATTACH MOUNT TO PROJECTOR Attach spider to projector. Then attach assembly to
ceiling.
3. FIT SAFETY CABLE Add fall-arrest cable to pole and projector.
8
TM-1200_manual_en.doc