TFA 60.2505 Instrucciones Para El Manejo página 11

TFA_No. 60.2505 Anleitung_01/12
Radio-controlled clock
7. Operation
• Important: Buttons will not function while scanning DCF signal.
• During the operation, all successful settings will be confirmed by a brief beep
tone.
• The instrument will automatically quit the setting mode if no button is pressed
within 20 seconds.
• Press and hold UP or DOWN button in the setting mode for fast running.
7.1 Manual setting of clock, time zone and calendar
• Press and hold SET button in normal mode. A brief beep tone will sound. 00 is
flashing. Press UP or DOWN buttons the time zone (+12/-12).
• The time zone setting is needed for countries where the DCF signal can be
received but the time zone is different from the German time.
• Press SET button to make the settings in the following sequence: Hours, minutes,
year, month and day. Press UP or DOWN button to adjust it.
• Confirm with SET button.
• The manually set time will be overwritten by the DCF time when the signal is
received successfully
• Press SET button to change between time and date (DATE appears on the dis-
play).
7.2 12 and 24 hours system indication
• Press DOWN button in normal mode to choose 12 HR or 24 HR system.
• A brief beep tone will sound.
• In 12 HR system AM or PM appears on the display.
20
24.01.2012 10:33 Uhr Seite 11
Radio-controlled clock
7.3 Setting of alarm clock
• Press and hold ALARM button.
• A brief beep tone will sound.
• flashes on the LCD of the display.
• The hour digit is flashing. Press UP or DOWN button to adjust the hours.
• Press ALARM button again and you can adjust the minutes with the UP or DOWN
button.
• Confirm with ALARM button.
• The display shows the current time.
• Press ALARM button again and the alarm function is activated.
• appears on the display.
• Once the alarm starts to ring (3 different sounds), you can stop the alarm by
pressing any button.
• You can activate the snooze function by pressing the SNOOZE/BRIGHTNESS but-
ton on the top.
• flashes and the alarm will be interrupted for 4 minutes.
• To turn off the alarm function, press again the ALARM button.
7.4 Backlight
• To activate the brightness of the backlight (2 levels), press SNOOZE/BRIGHTNESS
button.
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring agents. Protect
from moisture.
• Remove the batteries if you do not use the product for a lengthy period.
• Keep the instrument in a dry place.
21