GB
Cleaning the container and fan:
1. First empty the container and then
clean it using the cleaning brush.
(See figure 1).
2. Remove the fan housing and
clean the air intake/outlet using
the cleaning brush. (See figures 2
and 3).
3. Do not clean the fan with water!
4. Remove the filter and then clean the
container. (See figure 4).
5. Clean the filter using a hair dryer or
with the cleaning brush (See figures
5 and 6).
6. After cleaning, put it firmly back in
place as it was before dismantling.
installing/dismantling and cleaning the brushes
installing/dismantling the main brush and the floor brush:
1. Push the locking bar backwards and
lift the cover with your right thumb;
then lift the central cleaning brush
using your left hand. (See figures 1
and 2)
2. Remove the main brush and the
rubber roller. (See figure 3)
3. Insert the main brush and the floor
brush into their corresponding holes
before closing the cover.
30
figure 2
figure 5
figure 1
figure 3
figure 1
figure 3
figure 4
figure 6
figure 2