PALSON Diábolo Plus Modo De Empleo página 32

GB
installing/dismantling and cleaning the front wheel
1. Remove the front wheel using a tool for leverage and clean it. (See figure).
2. Fit and press the front wheel into its position to reinstall.
Cleaning the sensor and the transparent infrared window:
1. Clean the sensor and the transparent infrared window using a soft cloth.
2. The wall dirt sensor is located on the front of the robot, while the floor sensor and the transparent
infrared window are located on the bottom. (See figure below).
3. Keep the transparent window clean to ensure optimum performance.
32