Bottle Unloading Kit; Instructions For Replacing The Internal Lighting Device - FAS International JUST NOW Manual Del Usuario

JUST NOW – Issue 00
11.6

BOTTLE UNLOADING KIT

If the spiral springs in the tray have a six product capacity, insert
the bar in hole "A"
CAUTION: the bottle discharge bar must not be used to pull-out
the tray.
11.7

INSTRUCTIONS FOR REPLACING THE INTERNAL LIGHTING DEVICE


Switch off the machine by means of the main switch and disconnect the plug.

Open the main door.

Remove the cover from the light source.

Replace the light source.

Carry out the operations in reverse order to reassemble.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
39
E
N
G
L
I
S
H