Philips Avent SCF356 Manual Del Usuario página 9

'Feeding your baby immediately') or you can keep it warm in the
baby bottle warmer (see section 'Keeping milk warm').
Increasing the milk temperature
1 If you want the milk to be warmer, you can increase the milk
temperature gradually after it is ready by turning to milk warming
setting 3 and leaving the bottle in the appliance at the keep-warm
mode (Fig. 9).
2 If you just turned off the baby bottle warmer or if it just turned off
automatically, turn it back on without removing the warm water
from it, and follow the above step (Fig. 10).
3 The baby bottle warmer turns off automatically after 20 minutes
of keep-warm mode (Fig. 11).
Feeding your baby immediately
1 Press the on/off button to turn off the appliance and take out the
milk bottle (Fig. 10).
2 Always check the temperature of the milk before you feed your baby.
Gently swirl the milk in the bottle and check the temperature of the
milk by sprinkling a few drops on the inside of your wrist (Fig. 12).
3 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Keeping milk warm
1 When the milk has reached the desired temperature, the baby
bottle warmer automatically turns to the keep-warm mode. In this
mode, the milk is kept at the set temperature for 20 minutes (Fig. 14).
2 The baby bottle warmer turns off automatically after 20 minutes.
The progress indicator turns off to indicate that the milk is not
kept at the desired temperature anymore (Fig. 11).
Note: If you want to feed your baby with milk at the set temperature, you
need to take the milk bottle out of the baby bottle warmer and feed it to
your baby right after the baby bottle warmer turns off, otherwise the milk
cools down.
ENGLISH
11