Tools Required - Mopar K6861577 Manual De Instrucciones

GRAPHIC APPLICATION
INSTRUCTIONS
Note:
Wash hands prior to installation or use alcohol wipe.
Vehicle and badge temperature should be between 70° F and 90° F.
Leave vehicle in warm facility for 5 hours after application.
DO NOT wash car for 5 days after installation.
DO NOT apply in direct sunlight.
Heat Gun
(If needed)
RH Part

TOOLS REQUIRED

Clean Lint-Free
Cloth
Alc
100% Squeegee
Isopropyl
Alcohol
LH Part
Page 2 of 3