UNPACKING
This product must be assembled correctly before use.
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
PACKING LIST (Fig. 2)
- Tilling head (1)
- Upper and lower handle sections (1)
- Auxiliary handle (1)
- Handle support bracket (1)
- Wing nuts with bolts attached (2)
- Philip head self-tapping screws (2)
- Side cover (1)
- Operation manual (1)
If any parts are damaged or missing, please call our
customer service help line at 1-800-313-5111 for
assistance.
2
1 - Handle Support
1 - Auxiliary Handle
Bracket
2 - Wing Nuts
1 - M6x50
hex head
bolt
ASSEMBLY
PACKING LIST
1 - Operation Manual
1 - M6x45
hex carriage
bolt
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product .
WARNING: If any parts are damaged or missing do
not operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
WARNING: Do not attempt to modify this product or
create accessories not recommended for use with this
product .Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
WARNING: Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
1 - Upper and lower handle sections
1 - Tilling Head
2 - ST3.9x19 Philips head
self-tapping screws
5
1 - Side Cover